🔨 Rewrite add-on onto Bashio

glances/rootfs/etc/cont-init.d/10-requirements.sh

@@ -1,26 +1,7 @@
-#!/usr/bin/with-contenv bash
+#!/usr/bin/with-contenv bashio
 # ==============================================================================
 # Community Hass.io Add-ons: Glances
 # This files check if all user configuration requirements are met
 # ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-# Check SSL requirements, if enabled
-if hass.config.true 'ssl'; then
-    if ! hass.config.has_value 'certfile'; then
-        hass.die 'SSL is enabled, but no certfile was specified'
-    fi
-
-    if ! hass.config.has_value 'keyfile'; then
-        hass.die 'SSL is enabled, but no keyfile was specified'
-    fi
-
-    if ! hass.file_exists "/ssl/$(hass.config.get 'certfile')"; then
-        hass.die 'The configured certfile is not found'
-    fi
-
-    if ! hass.file_exists "/ssl/$(hass.config.get 'keyfile')"; then
-        hass.die 'The configured keyfile is not found'
-    fi
-fi
+bashio::config.require.ssl
+bashio::require.unprotected

glances/rootfs/etc/cont-init.d/11-docker.sh

@@ -1,33 +0,0 @@
-#!/usr/bin/with-contenv bash
-# ==============================================================================
-# Community Hass.io Add-ons: Glances
-# Unprotects this add-on in order to gain access to the Docker socket
-# ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-# Break in case the API is unreachable
-if ! hass.api.supervisor.ping; then
-    hass.die "Could you contact the HassIO API"
-fi
-
-# Docker support is enabled!
-if [[ -S "/var/run/docker.sock" ]]; then
-    hass.log.info 'Docker support has been enabled.'
-    exit "${EX_OK}"
-fi
-
-hass.log.fatal "PROTECTION MODE ENABLED!"
-hass.log.fatal ""
-hass.log.fatal "To be able to use this add-on, you'll need to disable"
-hass.log.fatal "protection mode on this add-on. Without it, the add-on"
-hass.log.fatal "is unable to access Docker."
-hass.log.fatal ""
-hass.log.fatal "Steps:"
-hass.log.fatal " - Go to the Hass.io Panel."
-hass.log.fatal " - Click on the 'Glances' add-on."
-hass.log.fatal " - Set the 'Protection mode' switch to off."
-hass.log.fatal " - Restart the add-on."
-hass.log.fatal ""
-
-exit "${EX_NOK}"

glances/rootfs/etc/cont-init.d/20-config.sh

@@ -1,19 +1,16 @@
-#!/usr/bin/with-contenv bash
+#!/usr/bin/with-contenv bashio
 # ==============================================================================
 # Community Hass.io Add-ons: Glances
 # Ensure the configuration exists
 # ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-if hass.file_exists '/config/glances/glances.conf'; then
+if bashio::fs.file_exists '/config/glances/glances.conf'; then
     cp -f /config/glances/glances.conf /etc/glances.conf
-    exit "${EX_OK}"
+    exit 0
 fi
 
 # Ensure configuration exists
 mkdir -p /config/glances \
-    || hass.die "Failed to create the Glances configuration directory"
+    || bashio::exit.nok "Failed to create the Glances configuration directory"
 
 # Copy in template file
 cp /etc/glances.conf /config/glances/

glances/rootfs/etc/cont-init.d/30-influxdb.sh

@@ -1,22 +1,19 @@
-#!/usr/bin/with-contenv bash
+#!/usr/bin/with-contenv bashio
 # ==============================================================================
 # Community Hass.io Add-ons: Glances
 # Export Glances data to InfluxDB
 # ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-if hass.config.false 'influxdb.enabled'; then
+if bashio::config.false 'influxdb.enabled'; then
     exit "${EX_OK}"
 fi
 
 # Modify the configuration
 {
     echo "[influxdb]"
-    echo "host=$(hass.config.get 'influxdb.host')"
-    echo "port=$(hass.config.get 'influxdb.port')"
-    echo "user=$(hass.config.get 'influxdb.username')"
-    echo "password=$(hass.config.get 'influxdb.password')"
-    echo "db=$(hass.config.get 'influxdb.database')"
-    echo "prefix=$(hass.config.get 'influxdb.prefix')"
+    echo "host=$(bashio::config 'influxdb.host')"
+    echo "port=$(bashio::config 'influxdb.port')"
+    echo "user=$(bashio::config 'influxdb.username')"
+    echo "password=$(bashio::config 'influxdb.password')"
+    echo "db=$(bashio::config 'influxdb.database')"
+    echo "prefix=$(bashio::config 'influxdb.prefix')"
 } >> /etc/glances.conf

glances/rootfs/etc/cont-init.d/70-nginx.sh

@@ -1,14 +1,11 @@
-#!/usr/bin/with-contenv bash
+#!/usr/bin/with-contenv bashio
 # ==============================================================================
 # Community Hass.io Add-ons: Glances
 # Configure the use of SSL in NGINX
 # ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-if hass.config.true 'ssl'; then
-    certfile=$(hass.config.get 'certfile')
-    keyfile=$(hass.config.get 'keyfile')
+if bashio::config.true 'ssl'; then
+    certfile=$(bashio::config 'certfile')
+    keyfile=$(bashio::config 'keyfile')
 
     sed -i "s/%%certfile%%/${certfile}/g" /etc/nginx/nginx-ssl.conf
     sed -i "s/%%keyfile%%/${keyfile}/g" /etc/nginx/nginx-ssl.conf

glances/rootfs/etc/services.d/glances/run

@@ -1,26 +1,23 @@
-#!/usr/bin/with-contenv bash
+#!/usr/bin/with-contenv bashio
 # ==============================================================================
 # Community Hass.io Add-ons: Glances
 # Runs Glances
 # ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
 declare -a options
 
-hass.log.info 'Starting Glances'
+bashio::log.info 'Starting Glances...'
 
 options+=(-C /etc/glances.conf)
 options+=(-w)
 options+=(--port 61209)
 options+=(--bind 127.0.0.1)
-options+=(--time "$(hass.config.get 'refresh_time')")
+options+=(--time "$(bashio::config 'refresh_time')")
 
-if hass.config.false 'process_info'; then
+if bashio::config.false 'process_info'; then
     options+=(--disable-process)
 fi
 
-if hass.debug; then
+if bashio::debug; then
     options+=(--debug)
 fi
 

glances/rootfs/etc/services.d/influxdb/run

@@ -1,14 +1,11 @@
-#!/usr/bin/with-contenv bash
+#!/usr/bin/with-contenv bashio
 # ==============================================================================
 # Community Hass.io Add-ons: Glances
 # Runs Glances InfluxDB Export
 # ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
 declare -a options
 
-if hass.config.false 'influxdb.enabled'; then
+if bashio::config.false 'influxdb.enabled'; then
     exec sleep 86400
 fi
 
@@ -16,12 +13,12 @@ options+=(-C /etc/glances.conf)
 options+=(--export influxdb)
 options+=(--quiet)
 
-if hass.debug; then
+if bashio::debug; then
     options+=(--debug)
 fi
 
 # Interval
-sleep "$(hass.config.get 'influxdb.interval')"
+sleep "$(bashio::config 'influxdb.interval')"
 
 # Run Glances
 exec glances "${options[@]}"

glances/rootfs/etc/services.d/nginx/run

@@ -1,22 +1,19 @@
-#!/usr/bin/with-contenv bash
+#!/usr/bin/with-contenv bashio
 # ==============================================================================
 # Community Hass.io Add-ons: Glances
 # Runs the nginx daemon
 # ==============================================================================
-# shellcheck disable=SC1091
-source /usr/lib/hassio-addons/base.sh
-
-hass.log.info 'Starting the NGINX daemon'
+bashio::log.info 'Starting the NGINX daemon...'
 
 # Wait for Glances to become available
 s6-svwait -u -t 5000 /var/run/s6/services/glances
 
 # Disable HA Authentication if front door is open
-if hass.config.true 'leave_front_door_open'; then
+if bashio::config.true 'leave_front_door_open'; then
     export DISABLE_HA_AUTHENTICATION=true
 fi
 
-if hass.config.true 'ssl'; then
+if bashio::config.true 'ssl'; then
     exec nginx -c /etc/nginx/nginx-ssl.conf
 else
     exec nginx -c /etc/nginx/nginx.conf